Paper cutters are an essential tool for any office or print shop, but they can be difficult to unlock if you don’t know how. This blog post will show you how to unlock paper cutter quickly and easily. So, whether you’re a new user or need a refresher, keep reading for all the information you need.
First, we recommend checking to ensure that the blade is completely disengaged. Next, locate the release lever and press down on it firmly. Finally, pull up on the arm of the paper cutter to release the locking mechanism. Read on to know more!
10 Effective Ways on How to Unlock Paper Cutter:
1. Use a Paper Clip:
Take a paper clip and straighten it out. Then take one of the ends and bend it to have two sharp spikes on either side. Now put this between the key slot and the lock at an angle to hit the end on your left to push the lock-up while holding down the button with your right hand.
2. Use the Spine of the Paper:
Take a long ruler or any other thin metal object you can find, and take it into the paper cutter. Then, ensuring that the blade is facing down, place it under your arm so that when you open up the paper cutter to get in, there will be adequate space for you to slide the ruler under the blade and out.
3. Use a Screwdriver:
Start by dismantling the paper cutter as much as you can. Make sure to take the blade off first, then after this, use a screwdriver to unscrew anything attached to the handle, such as screws or rivets.
After you have done all of this, you should be able to open it up and see the lock mechanism. The lock works by having a steel rod go through two holes in the handle. The top hole is bigger than the bottom, so it slides back into place when you push down on the button to release it. Next, use your screwdriver to loosen these rods until they are out of place.
4. Take a Wire Hanger:
Take a wire hanger and straighten it out as much as you can. Then take the curved part of the hanger and bend that into a hook shape to have something to slide under the blade. Finally, use it to push up on the release button until the blade is loose enough to pull open.
5. Use a Guitar Pick:
Find yourself a guitar pick that you can slide beneath the blade and use it to push up on the release button until it comes undone. You should be able to see inside now, but make sure you take out the blade first before trying anything else because the lock mechanism is still very much in place.
6. Use Strong Gripping Power From Strong Pliers:
Remove the blade first, then after this, use your pliers to grip onto each end of the metal rod which operates the lock. The more pressure you apply, the better but be sure not to bend it out of shape. Once you have gripped both ends tightly enough, try pulling one up so that it releases from its fastening inside before doing anything else.
7. Break Open the Blade:
Start by removing both sides of the blade using your pliers to pull them away from the center. You should see that there are two holes in each end, one for a rod and one for a screw. In the middle is a coil of sharp metal wire that cuts through the paper. Using strong gripping power and applying a lot of pressure, you should be able to break the blade and access its insides.
8. Hit It With a Hammer:
Start by disassembling everything, taking out the blade first but keep it somewhere safe because we will need it later on. Then take apart everything else until you can take out the lock mechanism. The trick to this one is you need to hit both ends of the metal rod, which operates the lock until it bends and goes back into place so that you can push down on the release button.
9. Pull It With Your Hands:
Take both ends of the metal rod which operates the lock. Apply a lot of pressure to pull it forwards until it releases from its fastening inside. Once you have done this, try pushing down on the release button again until it slides back into place, then removes your hands and take out the blade first before doing anything else.
10. Use a Ruler:
Take a ruler and slide it into the paper cutter with you right up to the blade so that when you open up the paper cutter, there is enough space for you to slide it under the blade and out. Then once you have done this, try pushing down on the release button again until it slides back into place and removes your ruler.
Some Helpful Tips and Suggestions:
1. If one has a paper cutter that they have used for a while, especially with the same key, it might be well to rekey the lock.
2. If one does not have a matching set of keys to all their locks around the house or a paper cutter, then buy an identical replacement from wherever they got the original. If one can’t get an identical replacement, buy a new paper cutter from the store.
3. One might want to consider if this is someone else’s paper cutter and they have similar keys; you would not want them to have access to your papers when you are not around.
4. If you want the person to have the papers to be cut and don’t mind rekeying, then leave a spare key for them.
5. If you can’t get an identical replacement or a new one from where you got the original, buy a paper cutter from another store or online.
6. If none of the above suggestions work and you need access to your paper cutter, you could always break into it.
You may read also How to Cut 100 Sheets of Paper
Conclusion:
This article has given you all the information you need on how to unlock paper cutter. It’s been shown that when people have difficulty with a task, they are more likely to give up and walk away from it altogether.
By following these simple steps, your chances of success increase exponentially! Unlocking a paper cutter is not as difficult as one might think; just follow these easy steps and see for yourself! If you have any questions or want to know more, then feel free to comment below!